||First Co WSHC024N2LHFE – 2 Ton, Packaged Horizontal Water Source Heat Pump with Cupronickel Heat Exchanger, PSC Motor
|Manufacturer Product Number
|SKU – PIM Number
|Unit of Measure
||215.0 Pound (lb.)
||43.1 Inches (in)
||20.1 Inches (in)
||18.2 Inches (in)
|EPA Cert Required
|Country of Origin
- Digital Diagnostic Display – A two-digit display indicates either the current operational mode or a fault code
- 24V Status LED – Green light indicates 24V power to the control module
- VPC (Vacated Premises Control) – Allows the unit to operate for either 1 or 2 hours per day (total) during extended periods of unoccupancy (requires optional kit).
- Nuisance Trip Protection – Unit will attempt to start up to three times with a fault signal. If the fault continues, the unit locks out.
- Condensate Overflow Lockout
- High and Low Pressure Controls
- Water Coil Low Temperature Protection
- Over / Under Voltage Protection
- Random Re-start Timer
- Anti-short Cycle Timer
- Test Mode With LED Indicator – Speeds up control timers for service personnel
- Alarm Relay – Activated if the unit locks out
- Conformal Coating (both sides) for humidity and condensation protection
- 100% Factory Tested!
- R-410A Refrigerant – All units operate with environmentally friendly R-410A refrigerant.
- Non-corrosive Thermoplastic Condensate Pan- Sloped for positive drainage
- High and Low pressure Service Ports
- Refrigerant Filter-drier and Discharge Muffler
- Panel-mounted FPT Water Connections – No back-up wrench needed.
- Removable Panels for Service
- 50 VA Transformer
- 1″ Throwaway Filter
Installation, Operation and Maintenance Instruction
Specifications and Features
List of Parts-First Co.