Revolv 3 Ton 14.5 SEER Complete Split System Heat Pump For Modular Home Quick Connect

Heat Pump Model: CHJD36

Electric Furnace Model: EB15D

Coil Model: 1854M4A

Blower Upgrade Model: 08250003

Coil Shelf Model: 13010003

Coil Cabinet Extension Model: 18EBEXT

Revolv 3 Ton 14.5 SEER Complete Split System Heat Pump For Modular Home Quick Connect

Revolv 3 Ton up to 15 SEER R410A Split System Heat Pump Condenser

5 year compressor and parts warranty.

Features

• Durable powder coat finish
• Connection available in sweat fit
• High humidity control performance
• Energy saving heat pump technology
• Meets new federal mandated high efficiency
  standards

• State of the art compressor technology
• 100% corrosion resistant copper tube coils
• Patented fittings securely connect with just two
  adjustable wrenches.
• Jacketed design is factory installed offering
  increased severe weather durability

Documentation

• Specifications

• Install Manual
• User Manual

Revolv Accu-Charge 3.0 – 5.0 Ton R410A A-Coil

The Revolv™ R410A Coil series is designed to be “THE” A-COIL choice to be installed on new and existing down flow MH furnaces.

Features

• Accu-Charge fittings
• Mounted TXV sensor bulb
• Coil has built-in strainer for coil protection
• Factory installed TXV valve suitable for A/C or
  H/P applications

• Dry–type pan does not maintain standing water
• UL listed and leak tested to 500 p.s.i. Code
  approved 2–opening drain pan
• Kit contains drain hose, fittings, and furnace
  cover plates for gas/oil furnace

Documentation

• Brochure

Revolv EB Series Electric Furnace with 15KW Heat

Revolv is dedicated to bringing efficient comfort to the manufactured and mobile home market. Their innovation can be seen easily in the EB series of electric furnaces. Since it does not utilize combustion, the EB furnace doesn’t require a vent system, just readily available airflow. The EB10D is capable of providing 34,000 BTU of heating at 100% efficiency in Department of Energy specified applications, meaning that every kWh of electricity used goes towards heating. When it comes to electric comfort in a manufactured home, the EB10D is hard to beat.

Easy, Safe Installation
Finding a place to install an EB electric furnace is easy. In downflow applications, it requires no clearance to combustibles and in upflow applications, a single inch from the outlet duct is required.

Advanced Heat Elements
The EB’s heating elements are designed with nickel and chrome, giving them optimal electric resistance for efficient heating and a long life-span for your peace of mind. They are activated and deactivated in stages, preventing unnecessary wear and tear.

Low Noise
Disruptive sound levels aren’t a concern with this furnace. Revolv lined their EB series electric furnaces with sound-dampening insulation to provide quiet comfort.

Multi-Speed Fan
The EB10D uses a four speed motor for the blower, giving you excellent airflow that can be scaled to the size of your home.

Integral Circuit Breakers
You don’t have to worry about your electrical system being damaged by shorts with an EB electric furnace. They are equipped with their own set of circuit breakers in place of fuses.

Upflow Compatible
The EB10D ships in a downflow configuration, but it can be easily converted to an upflow application with a 3500.7211 upflow flange plate kit.

Internal Filtration
The EB doesn’t just keep your home comfortable, it also keeps you air clean. An air filter that captures dust, lint, and other contaminants is installed in the top of the furnace cabinet, where it is easy to check and replace.

Features

• Heat Pump and A/C Ready
• Built-In Insulated Coil Cabinet
• 4 Ton A/C, 3 1/2 Ton Heat Pump Blower Capacity

• Upflow/Downflow Convertible
• Top/Front Return Air Convertible
• Full Sequenced Heat to Protect Home Electronics

Documentation

• Specifications

• Install Manual
• User Manual