Swimming pool heat pumps and pool heaters should bring happiness and less stress into your life. You should be able to enjoy your warm tropical water without worrying about repairing your heat pump. It is a machine though and sometimes you have to have it serviced. Here are some tips if your pool heater is not heating.

1: Is your pool heat pump running at all? Look to see if the digital display is lite up and displaying a message. Many times the pool heater will tell you what is wrong. If you hear no sound and see no display then look to see that your circuit breaker tripped off and replace your fuse if you have one.

2: If you see low flow on the display then see if your filter is clean and all the valves are in the right position.

3: Sometimes you need to turn the breaker on and off to reset the heat pump if it had experienced multiple water flow failures.

4: The pool heat pump is running and the pool isn’t heating up then see if the discharge air temperature is about 10 degrees cooler than the outside air. That shows the compressor is running.

5: If everything seems to be working you might need to run the filter pump longer or put a blanket on the pool.

6: Text me at 360 348 7574 to tell me what is happening and I might be able to help troubleshoot.

7: If there is water draining from the heat pump and it is running that should be normal condensation. If you have any doubt then put a chlorine test strip in the water to see if chlorine. If chlorine then you have a leak. No chlorine then it is normal.

8: If also might have shut down to a cold night below 50 degrees. Give it some time to warm in the sun. Some low-temperature heat pumps will go into the 30’s.

We are here for you if you have any questions on how to troubleshoot your pool heat pump.